Do you know how to extend the life of the layered conveyor belt?

Conveyor belts are often seen in our daily life, and everyone is familiar with them. It is divided into layered conveyor belt, wire rope conveyor belt, etc. However, due to the lack of timely maintenance in daily work, the service life of the conveyor belt is reduced. So how to extend the service life of the conveyor belt, let's take a look!
The support point is the vulnerable part of the conveyor belt. The speed of the conveyor belt and the bulk of the material are related to the operation of the conveyor belt, and the influence and direction of the load-bearing operation are both important factors. The conveyor belt should be kept clean during transportation and storage, avoid direct sunlight or rain and snow, prevent contact with acids, alkalis, oils, organic solvents and other substances, and keep 1 meter away from the heating device. When cleaning the dust under the rollers of the belt conveyor, it should be done when the machine is stopped, and it is strictly forbidden to walk on the belt conveyor.
During the storage of the conveyor belt, the product must be rolled up and not folded. During the storage period, a quarterly turnover is required. In order to prevent the roller from being covered by the material and cause the rotation failure, in order to prevent the leakage of the material between the card, the roller and the tape, pay attention to the lubrication of the moving parts, but do not make the conveyor belt stick to oil. Conveyor belts of different types and specifications are not suitable for use together, and the joints are bonded. The relationship between the roller diameter of the driving roller conveyor belt and the cloth layer conveyor belt, the matching requirements of the driving roller and the twisting roller and the groove angle of the roller should be based on the design requirements to select a reasonable belt conveyor.
The transmission of the angle between the moving direction of the conveyor belt will only increase the wear of the surface of the belt. The impact of the material and the tape will deviate from the feeding in the middle, causing the tape to crawl to the other side along the rotating idler and deviate, causing damage to the edge of the tape. Regular inspection of the conveyor belt itself and timely treatment are important measures to prevent accidents and increase the service life of the conveyor belt. The conveyor belt should be carefully inspected to check whether the conveyor belt is damaged, degummed, displaced, opened, etc. If it is damaged, the equipment should be cut off in time, and the relevant maintenance personnel should be called for maintenance and inspection.
The above is the method to prolong the service life of the layered conveyor belt. Regular cleaning and maintenance of the layered conveyor belt is an important factor to prolong its service life, and it is also a way to reduce the hidden danger of accidents. Hope the above content can be helpful to you.